Audio-Technica ATW-T1007W2 Microphone Desk Stand Transmitter for System 10 Pro

SKU: E-6-453

Category:
Pro-Audio

Sub-Category:
Microphones

Designed to work with phantom-powered, condenser gooseneck microphones with a 3-pin XLRM-type output, the ATW-T1007 System 10 Microphone Desk Stand Transmitter pairs with the System 10 or System 10 PRO digital wireless receiver of your choice to provide rock-solid, 2.4 GHz wireless performance.

PHP 21,100.00

PHP 15,825.00

This product is currently out of stock on our online store but is available at our physical stores / branches. Check out our store locator to find and contact a branch near you.

The transmitter is equipped with a 3-pin XLRF-type input, and features a touch-sensitive user switch that can toggle between talk and mute modes, or function as a press-to-talk or press-to-mute button. Two red/green LEDs one visible from the front of the unit, the other from the rear indicate toggle/talk/mute mode, battery level, and charging status. The ATW-T1007 also offers three levels of input gain (-6 dB, 0 dB and +6 dB), which can be selected via a switch on the bottom of the unit. Another switch engages the low-cut filter. The 3.7V rechargeable lithium-ion battery provides nine hours of use on a full charge and is easily recharged with the included USB charging cable.

Pairs with any System 10 or System 10 PRO digital wireless receiver
3-pin XLRF-type in for quick mounting of gooseneck microphone
Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
Operates in the 2.4 GHz range completely free from TV interference
User switch can be set to toggle between talk and mute modes, or function as a press-to-talk or press-to-mute button
Gain Control switch allows selection of three input gain levels: -6 dB (for loudest voices), 0 dB and +6 dB (for softest voices)
Two red/green LEDs one visible from the front of the unit, the other from the rear indicate toggle/talk/mute mode, battery level, and charging status
Switchable low-cut filter
System ID Display located on bottom of unit
Automatic frequency selection for seamless, interference-free operation

RF Power Output: 10 mW

Spurious Emissions: Following federal and national regulations

Power Supply: 100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type power supply

Battery: 3.7V rechargeable lithium-ion battery

Battery Life: 9 hours

Charging Time: Approx. 4.5 hours (for 0-100% charge)

Switches: Touch-sensitive, capacitive-type user switch function: toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: -6 dB, 0 dB, +6 dB

Dimensions: 96.8 mm (3.81") W × 44.2 mm (1.74") H × 122.8 mm (4.83") D

Net Weight: 420 g (14.8 oz)

Accessories Included: AC Adaptor (USB-type), USB charging cable

Customer Reviews

No Reviews / Ratings