Laney AHP112 AudioHUB 12-inch 1400 Watts Active Speaker

SKU: E-5-1119

Brand:
Laney

Category:
Pro-Audio

Sub-Category:
Speakers

The AudioHUB AHP Range of loudspeakers are high power, high performance active PA cabinets.

PHP 26,900.00

PHP 24,210.00

The AudioHUB AHP Range of loudspeakers are high power, high performance active PA cabinets. Offering 1400W of Class D power output and an impressively high output SPL. Housed in a tough road worthy Polypropylene cabinet, all models feature dual 1/4" & XLR Mic/line input channels with individual gain controls, on-board DSP with 4 audio modes, master volume control, and mix output with ground lift switch. They also include dual angle pole mount sockets, and may be suspended with the integrated flying points. Suitable for full range or monitor use.

FEATURES

1400 Watts Peak

Integrated Two Channel Mixer

Balanced XLR Mix Out

Four Preset EQ Modes

Internal DPS for optimal sound quality (Crossover, EQ, Dual Band Limiters, Phase and Time Optimisation)

1. INPUT CHANNELS

LEVEL – Set the input gain level for the respective channel. Set to minimum before connecting an audio signal.

INPUT XLR SOCKETS – XLR and 6.3mm jack combi socket that can be used with balanced or unbalanced signals. Balanced signals provide superior noise rejection over long cable runs.

2. MAIN CONTROLS

MASTER VOLUME – Controls the overall level of the output mix. Set to minimum when

turning the system on and off.

LIMIT LED – All AHP units have an onboard limiter to prevent overloading the amplifier and loudspeakers.

Will illuminate when the limiter is active. Occasional blinking is ok however continuous illumination should be avoided. Turn the input levels and master volume down until it goes off to prevent damage to the amplifier.

MIX OUT – Line level signal not affected by master volume. Can be used to daisy chain multiple units or connect a personal monitor or mixing PA.

3. MODE AND OPTION SELECT

GROUND LINK - Disconnects signal ground from the chassis to potentially remove ground hum.

MODE SELECT – Choose between the four presets included with your AHP full range cabinet depending on your use.

MUSIC – Bass lift with flat mid/high response.

LIVE – Similar to ‘MUSIC’ but the LF lift is shifted to a higher frequency.

MONITOR – LF and HF roll-off with a slight mid band cut for clarity.

VOCAL – Bass roll off with flat mid and upper frequencies.

Model AHP112

Type 2-Way Bi-Amp Powered Loudspeaker, Bass Reflex

Frequency Response 45Hz - 20000Hz (-10dB) 50Hz - 18000Hz (-3dB)

LF Driver 12" HH Designed Woofer with 2.4" Voice Coil

HF Driver 1" Compression Driver

Crossover Frequency 2.5KHz

Coverage 90° x 90°

Max SPL 1m2

127 dB SPL Continuous, 130 dB SPL Peak

Controls 2x Channel Gain Controls, Master Volume, Ground Lift, EQ Mode (4 Options)

Input Connectors 2x Balanced Combi XLR/1/4" Jack connectors

Output Connectors 1x Balanced XLR Mix Output

Input Impedance 10K

Signal Indicators Clip Indicator 

Amplifier

System Amplifier Power Rating 1400W Peak (Biamp)

Amplifier Type LF Class D, HF Class A/B

Power Supply Universal SMPS

Protection Comprehensive protection and clip free limiting + clip indicator 

Enclosure Robust Black polypropylene cabinet with monitor angle

Grille Heavy Gauge powder-coated steel, Black with acoustic foam backing

Handles Two Integrated side handles and one top handle

Flying Points 4 x M8 Mounting Points

Pole Socket Bottom 35mm Pole Mount Socket with two angles (0° and 7°) 

Power Requirements

AC Power Universal 100V-240V~ 50/60Hz

Power Inlet IEC C14 Inlet Typical

Power Consumption 300W

Other

Unit dimensions (HWD) 600 x 363 x 351mm, (23.6" x 14.3" x 13.8")

Unit weight 15Kg, (33.1 lbs)

Carton dimensions

(HWD) 670 x 420 x 410mm, (26.4" x 16.5" x 16.1") , 0.115 M3

Packed Weight 21Kg, (46.3 lbs)

EAN Code 5060109458824

Customer Reviews

No Reviews / Ratings